Relay 2 Channel 5V Board ( With Opto Coupler)
₹75.00₹83.00 (-10%)
Feature
- Easy to use, each set of output 3 line structure simple, reserved 6 output terminal;
- Input directly connected to the microcontroller IO port or digital circuit, the input high
- Can be used as microcontroller development board module can be used as home appliance control
- A power indicator light
- A control indicator , pull off, disconnect does not shine
- The control pin has a pull-down circuit to prevent malfunction relay vacant
The Two Channel Relay Module is a convenient board which can be used to control high voltage, high current load such as motor, solenoid valves, lamps and AC load. It is designed to interface with micro-controller such as Arduino, PIC and etc. The relays terminal (COM, NO and NC) is being brought out with screw terminal. It also comes with a LED to indicate the status of relay. This is a Single Pole Double Throw (SPDT) Configuration relay.
Technical Specifications
Weight | 27 g |
---|---|
Dimensions | 60 × 50 × 30 mm |
Input Voltage | 5V |
Max Current | 7A |
Relay Contact Current Capacity at 250 V AC | 7V |
Relay Contact Current Capacity at 30 V DC | 7A |
Reviews
There are no reviews yet.