TTP224 4 channel Capacitive touch sensor Module
₹95.00
Features
- Simple to Use, Auto Calibration
- Output Status Indicator LED
- Output can configured be Active High or Low
- Output Mode can be configured to Toggle or Momentary
- Easy to replace mechanical key outputs
- Output can be directly connected to Microcontroller’s Input pins
4 Channel Capacitive Touch Module uses the touch-sensing IC TTP224 to sense the touch input. The module has 4 touch pads. Power the module with 2.4 ~ 5.5V DC and the touch pad is all active to sense the input.Four Channel Capacitive Touch Module is easy to interface. It can be used along with a microcontroller or an arduino or even without one. When a capacitive load is in close proximity to the sense-pad, the sensor detects the change in capacitance and activates the switch. Custom sense-pads can be made from nearly any conductive material and these sensors can detect touch through thin layers of non-conductive materials such as glass, plastic, fabric or even wood.
Technical Specifications
Weight | 10 g |
---|---|
Dimensions | 35 × 29 mm |
Main Chip | TTP224 |
Operating Voltage | 2.4V-5.5V |
Startup Calibration Delay | 0.5 Sec |
Reviews
There are no reviews yet.