Ublox Neo 6m GPS module

400.00500.00 (-20%)

In stock


The u-blox NEO-6M GPS engine on these modules is quite a good one, and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings. The module works well with a DC input in the 3.3- to 5-V range (thanks to its built-in voltage regulator).

The GPS modules are based on the u-blox NEO-6M GPS engine. The type number of the NEO-6M is NEO-6M-0-001, and its ROM/FLASH version is ROM 7.0.3 (PCN reference UBX-TN-11047-1). The NEO-6M module includes one configurable UART interface for serial communication, but the default UART (TTL) baud rate here is 9,600. Because the GPS signal is right-hand circular-polarized (RHCP), the style of the GPS antenna will be different from the common whip antennas used for linear polarized signals. The most popular antenna type is the patch antenna. Patch antennas are flat, generally have a ceramic and metal body, and are mounted on a metal base plate. They are often cast in a housing.

Remember, the position of the antenna mounting is very crucial for optimal performance of the GPS receiver. When using the patch antenna, it should be oriented parallel to the geographic horizon. The antenna must have full view of the sky, ensuring a direct line of sight with as many visible satellites as possible.

Pin Configuration

  1. Tx: Data Transmit
  2. Rx: Data Receive
  3. Vcc: Input Power Supply
  4. Gnd: Ground

Technical Specifications

Weight 15 g
Dimensions 35 × 25 mm
Operating Voltage 3.3V-5V
Default Baud Rate 9600 bps
Mounting Hole Diameter 3 mm
Model GY-GPS6MV2


Be the first to review “Ublox Neo 6m GPS module”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu