XBEE S2C 802.15.4 RF Modules

835.00850.00 (-2%)

In stock


  • Out-of-the-box RF communications, no configuration needed
  • Point-to-multipoint network topology
  • 2.4GHz for worldwide deployment
  • Common XBee footprint for a variety of RF modules
  • Industry leading sleep current of sub 1uA
  • Firmware upgrades via UART, SPI or over the air
  • Migratable to DigiMesh and ZigBee PRO protocols
  • Transceiver chipset: Silicon Labs EM357 SoC
  • Data Rate RF: 250Kbps, serial up to 1Mbps
  • Indoor/urban range: 200-ft. (60m) 300-ft. (90m)
  • Outdoor/RF line-of-sight range: 4000-ft. (1200m) 2 miles (3200m)
  • Transmit power: 3.1mW (+5dBm)/6.3mW (+8dBm) boost mode 63mW (+18dBm)
  • Receiver sensitivity: (1% PER) -100dBm/-102dBm boost mode -101dBm
  • Serial Data Interface: UART, SPI
  • Configuration Method: API or AT commands, local or over-the-air (OTA)
  • Frequency Band: ISM 2.4GHz
  • Form factor: through-hole, surface mount
  • Hardware: S2C
  • ADC inputs: (4) 10-bit ADC inputs
  • Digital I/O: 15

XBee 802.15.4 products enable robust end-point connectivity with ease. The modules provide quick, robust communication in point-to-point, peer-to-peer, and multipoint/star configurations. XBee 802.15.4 RF modules maximize performance and ease of development as a pure cable replacement for simple serial XBee® S2C 802.15.4 RF Modules communication, or as part of a more complex hub-and-spoke network of sensors.

Technical Specifications

Weight 20 g
Supply Voltage Range +2.1V to +3.6V
Operating Current 33mA (at3.3V, for Normal mode) , 45mA (at 3.3V,for Boost mode)
Idle Current 9mA
Maximum output current on all pins together 40mA
Power-down Current <1uA @25C
ESD protection 3000V
Operating Temperature -40ºC to 85° C
Be the first to review “XBEE S2C 802.15.4 RF Modules”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu