Arduino Uno Smd Ch340 Board
Unlock your creativity with the UNO SMD CH340—an Arduino-compatible board designed for streamlined performance and compact efficiency. Featuring the reliable ATmega328P and CH340 USB interface, it’s perfect for makers, educators, and innovators alike. With 14 digital I/Os, 6 analog inputs, and seamless USB connectivity, this board powers up your robotics, IoT, and automation projects with ease. Sleek SMD design, plug-and-play simplicity, and full Arduino IDE support make it a must-have for any serious prototyping toolkit.
₹295.00 exc. GST
Based on 0 reviews
Be the first to review “Arduino Uno Smd Ch340 Board”
Related products
-
Arduino Boards
Arduino Nano Unsoldered Board
An unsoldered Arduino Nano board is essentially an Arduino Nano that has had its header pins removed. This can be useful if you want to integrate the Nano into a custom PCB or project without the bulk of the headers. The Arduino Nano is a compact and versatile microcontroller board based on the ATmega328P or ATmega168. Here are its key features:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended)
- Digital I/O Pins: 14 (6 PWM outputs)
- Analog Input Pins: 8
- Flash Memory: 32 KB (ATmega328P), 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- USB: Mini-B USB connector for power and programming
Ideal for embedded projects and prototyping due to its small size and flexibility.
SKU: n/a -
Arduino Boards
Arduino Nano Ch340 Soldered Board Type C
The Arduino Nano is a compact microcontroller board based on the ATmega328P, featuring 30 soldered male header pins for easy prototyping. This variant includes a CH340 USB-to-serial converter and a USB Type-C port, offering modern connectivity and reliable programming.
⚙️ Key Technical Details:
• Microcontroller: ATmega328P, 8-bit AVR, 16 MHz clock speed
• USB Interface: CH340G IC handles serial communication via USB Type-C
• Power Supply:
• VIN: 6–12V input
• 5V & 3.3V: Regulated outputs for peripherals
• USB VBUS: Supplies 5V when connected via Type-C
• I/O Pins:
• Digital: 14 (D0–D13), including PWM on D3, D5, D6, D9, D10, D11
• Analog: 8 (A0–A7), 10-bit ADC resolution
• Serial: UART (TX: D1, RX: D0), SPI (D10–D13), I2C (A4: SDA, A5: SCL)
• Flash Memory: 32 KB (2 KB used by bootloader)
• SRAM: 2 KB
• EEPROM: 1 KB
🔌 Type-C Connector Notes:
• Supports USB 2.0 data lines (D+/D−) routed to CH340
• VBUS and GND provide power input
• CC pins typically tied to ground via pull-down resistors for cable orientation
This Nano variant is ideal for embedded systems, sensor networks, and compact automation projects—especially where modern USB compatibility and robust serial communication are essential.SKU: n/a -
Arduino Boards
Arduino Pro Mini 5v Atmega328p
The Arduino Pro Mini operates on 3.3V and has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an onboard resonator, a reset button, and holes for mounting pin headers having 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
SKU: n/a -
Arduino Boards
Arduino Pro Micro
Arduino Pro Micro Clone Board – Compact and Versatile!The Arduino Pro Micro Clone Board is a small yet powerful microcontroller perfect for hobbyists, makers, and DIY enthusiasts. Here are some key features:Microcontroller: ATmega32U4 running at 16 MHz.Digital I/O Pins: 12 pins for versatile control.Analog Input Pins: 4 pins with 10-bit ADC.PWM Pins: 5 pins for precise control of devices.USB Connection: Built-in USB-to-serial converter for easy programming and communication.Operating Voltage: 5V, with a built-in voltage regulator allowing input up to 12VDC.Size: Compact form factor, making it ideal for projects with space constraints.Perfect for USB HID projects, robotics, and embedded systems!SKU: n/a
There are no reviews yet.