TCS3200 Color Sensor Module
The TCS3200 Color Sensor Module is a compact device used to detect and measure colors. It features 16 photodiodes with different filters (red, green, blue, and clear) and a current-to-frequency converter that outputs a frequency proportional to the light intensity of the detected color. Ideal for color recognition projects like color matching, sorting, and test strip reading.
₹350.00 exc. GST
Based on 0 reviews
Be the first to review “TCS3200 Color Sensor Module”
Related products
-
Sensor Boards And Modules
GPS Module Neo 6m
The u-blox GPS module NEO-6M is a widely used GPS (Global Positioning System) module that provides accurate positioning and timing information. It is a compact and cost-effective module commonly used in various applications, including navigation systems, vehicle tracking, drones, and location-based projects.
Here are some key features and information about the NEO-6M GPS module:
- Positioning Accuracy: The module can provide positioning accuracy within a few meters, depending on the quality of the received satellite signals and other factors. It supports the simultaneous reception of up to 50 satellites from GPS, GLONASS, and other positioning systems.
- Communication Interface: The module communicates with a microcontroller or other devices using a serial communication interface, typically UART (Universal Asynchronous Receiver-Transmitter). It uses standard NMEA (National Marine Electronics Association) protocol to transmit GPS data.
- Output Data: The module provides various data outputs, including latitude, longitude, altitude, velocity, date, time, and satellite information. The data is typically in the NMEA format, which can be easily parsed and processed by microcontrollers or software applications.
- Power Supply: The module operates on a 3.3V power supply and consumes relatively low power, making it suitable for battery-powered applications.
- Configuration: The GPS NEO-6M module can be configured using specific AT (Attention) commands sent over the serial interface. These commands allow you to adjust parameters such as update rate, baud rate, and output message formats.
When using the GPS module NEO-6M, it’s essential to provide a clear view of the sky to ensure better satellite reception. Additionally, integrating the module with a microcontroller or other processing unit enables you to make use of the GPS data for your specific application.
SKU: n/a -
Sensor Boards And Modules
Current Sensor ACS712-20A
The ACS712-20A is another variant of the ACS712 current sensor series. Similar to the ACS712-5A, the ACS712-20A is an integrated circuit (IC) module designed for measuring current in electronic circuits using the Hall effect principle. However, the ACS712-20A has a higher nominal current rating of 20A, making it suitable for measuring higher current levels.
This module provides an analog voltage output that is proportional to the current passing through it. The output voltage has a sensitivity of 100mV per ampere of current, meaning that for every ampere of current flowing through the module, the output voltage will increase by 100mV.
SKU: n/a -
-
Sensor Boards And Modules
Joystick Module
A joystick module is an input device that allows users to control movement or direction in various applications, such as gaming, robotics, and industrial control systems. It typically consists of two potentiometers (one for each axis) and various buttons or switches.
SKU: n/a
There are no reviews yet.