TSOP 1838 38khz IR Sensor
35 in stock
The IR Sensor 1838-TSOP1838 is a compact infrared receiver module tuned to 38kHz, making it compatible with most remote controls. It outputs a clean digital signal for easy interfacing with microcontrollers like Arduino, ESP32, and Raspberry Pi, enabling reliable remote control and automation projects.
Specfications:
- Type: Infrared receiver sensor
- Frequency: 38kHz carrier detection
- Operating Voltage: 2.7V – 5.5V
- Output: Active low digital signal
- Features: High sensitivity, low power consumption, built‑in AGC (Automatic Gain Control)
- Applications: Remote control systems, DIY electronics, robotics, home automation
₹20.00 exc. GST
35 in stock
Based on 0 reviews
Be the first to review “TSOP 1838 38khz IR Sensor”
Related products
-
Electronic Components
TFT Display SPI Interface 1.44 inch
Compact 1.44‑inch TFT color display(RGB 65K) with 128×128 resolution and 4 wire SPI interface with ST7735S driver, ideal for Arduino, ESP32, Raspberry Pi, and DIY electronics projects. Delivers bright, full‑color visuals in a small form factor, perfect for portable devices, wearables, and embedded systems. Easy to integrate with microcontrollers for graphics, text, and sensor data visualization. VCC:3.3v to 5v
SKU: n/a -
Electronic Components
Diode 1n4007 (Pack of 5pcs)
The 1N4007 is a general-purpose rectifier diode in a DO-41 package. It is widely used in power supply circuits for converting AC to DC. Here’s a brief overview:
Key Features
Maximum Reverse Voltage: 1000VAverage Forward Current: 1A
Peak Forward Current: 30A
Power Dissipation: 3W
Low Reverse Current: 5µA
Operating Temperature: -55°C to +175°C
Pin Configuration
The 1N4007 diode has two main terminals:Anode: Current enters through this terminal.
Cathode: Current exits through this terminal (usually marked with a grey band).
Applications
Rectification: Converting AC to DC in power supplies.Voltage Protection: Blocking voltage spikes.
Battery Chargers: Preventing reverse polarity.
General Purpose: Any application requiring a diode for current flow regulation.
SKU: n/a -
Electronic Components
BC549 Transistor Biploar-NPN (Pack of 5 Pieces)
The BC549 transistor is a general-purpose NPN bipolar junction transistor (BJT) used in a variety of electronic circuits. Here’s a brief overview:
Key Features:
Type: NPN Bipolar Junction Transistor (BJT)Maximum Collector-Emitter Voltage (Vce): 30V
Collector Current (Ic): 100mA
Current Gain (hFE): 110 to 800
Package: TO-92
Applications:
Amplifiers: Used in small-signal amplification circuits.Switching: Suitable for switching small loads.
Audio Processing: Employed in audio preamplification and noise filtering.
The BC549 transistor is valued for its versatility and reliability in various electronic applications.
SKU: n/a -
Electronic Components
LCD 16×2 with I2C
The 16×2 LCD with I2C Module simplifies display in projects. Here are its key features:
Display Size: 16 columns, 2 rows
I2C Interface: Reduces wiring, uses only two data pins
Power Supply: 5V operation
Backlight: Enhanced visibility
Compatibility: Works with Arduino, Raspberry Pi, etc.
Ideal for displaying sensor data, creating user interfaces, and educational projects.
SKU: n/a
There are no reviews yet.