Waterflow YFS401 Sensor Module
The YF-S401 Water Flow Sensor is a compact Hall-effect flow meter designed for accurate liquid flow measurement in water dispensers, coffee machines, water purifiers, smart irrigation systems, and IoT projects. Compatible with Arduino, ESP32, ESP8266, Raspberry Pi, STM32, and other microcontrollers, it generates pulse signals proportional to the water flow rate, enabling real-time monitoring and automation. Its compact design, high sealing performance, and reliable operation make it an excellent choice for DIY electronics, robotics, and industrial fluid control applications.
Technical Specifications:
- Model: YF-S401
- Nozzle / Thread Size: Standard 1/8″ (approx. 3.5 mm to 4 mm inner connection)
- Inner Diameter (ID): 4 mm
- Outer Diameter (OD) / Hose Connection: 7 mm (designed for a 6 mm flexible hose)
- Sensor Type: Hall Effect Water Flow Sensor
- Operating Voltage: 5V to 24V DC
- Maximum Operating Current: 15mA
- Flow Rate Range: 0.3 to 6 L/min
- Accuracy: ±3% to ±5%
- Maximum Water Pressure: 0.35 MPa
- Output Signal: Digital Pulse Frequency Output
- Operating Temperature: Up to 80°C
- Liquid Temperature: Up to 120°C
- Interface: 3-Wire (VCC, GND, Signal)
- Weight: Approx. 25-30g
- Applications: Water Purifiers, Coffee Machines, Smart Irrigation, Vending Machines, Flow Monitoring Systems, IoT Projects, Industrial Automation
₹265.00 exc. GST
Based on 0 reviews
Be the first to review “Waterflow YFS401 Sensor Module”
You may also like…
-
Relay And Relay boards
Relay Module 1 Channel 5V
A relay module 1 channel 5v is an electronic module that allows you to control the switching of a single circuit using a low-voltage control signal. It typically consists of a relay, control circuitry, and connectors for input and output connections.
When using a relay module 1 channel 5v, it’s important to pay attention to the maximum current and voltage ratings specified by the manufacturer. Exceeding these ratings could damage the relay or the circuit you are controlling. Additionally, always follow proper safety precautions when working with electrical circuits.
SKU: n/a -
Relay And Relay boards
Relay Module 2 Channel 5v
A relay module 2channel 5V is an electronic module that allows you to control the switching of two independent circuits using low-voltage control signals. It is similar to a 1-channel relay board but offers the ability to control two separate circuits.
This relay module 2 channel 5v can be used in applications such as home automation systems, robotics projects, IoT devices, lighting control for multiple zones, motor control, and various other electronic and industrial projects where you need to switch two circuits.
SKU: n/a -
Arduino Boards
Arduino Uno R3 Atmega328p Board
The Arduino Uno R3 ATmega328 is the most popular and versatile microcontroller board in the Arduino family, designed for beginners, hobbyists, and professionals alike. Powered by the ATmega328P running at 16 MHz, it offers 14 digital I/O pins (6 PWM outputs), 6 analog inputs, and 32 KB of flash memory, making it ideal for a wide range of embedded applications. Operating at 5V with a recommended input of 7–12V, the Uno R3 ensures stable performance for robotics, IoT devices, automation, and educational projects.
Technical Specifications:
Key Features
- Microcontroller: ATmega328P (16 MHz clock speed)
- Operating Voltage: 5V
- Input Voltage (recommended): 5–9V
- Digital I/O Pins: 14 (6 PWM outputs)
- Analog Input Pins: 6
- Memory: 32 KB Flash (0.5 KB used by bootloader), 2 KB SRAM, 1 KB EEPROM
- USB Interface: Standard Type‑B port (ATmega16U2 or CH340 depending on variant)
- Reset Button: Onboard for quick reprogramming
- Compatibility: Fully supports Arduino IDE, libraries, and shields
SKU: n/a -
Arduino Boards
Arduino Uno Smd Ch340 Board
The Arduino Uno SMD CH340 board is a cost‑effective variant of the classic Uno R3, built around the ATmega328P SMD microcontroller and the CH340G USB‑to‑serial chip. It offers the same pin layout and compatibility as the original Uno, but is more compact, vibration‑resistant, and budget‑friendly.
Key Features
- Microcontroller: ATmega328P (SMD package, 16 MHz clock)
- USB Interface: CH340G chip (requires driver installation on Windows/macOS)
- I/O Pins: 14 digital (6 PWM), 6 analog inputs
- Memory: 32 KB flash, 2 KB SRAM, 1 KB EEPROM
- Operating Voltage: 5V
- Power Options: USB Type‑B port or DC barrel jack (7–12V recommended)
- Compatibility: Fully supports Arduino IDE, libraries, and shields without modification
- Durability: SMD design improves vibration resistance and thermal stability compared to DIP socket versions
SKU: n/a
Related products
-
Sensor Boards And Modules
HC 05 Bluetooth Module
HC‑05 Bluetooth Module – Wireless Serial Communication for Arduino & IoT The HC‑05 Bluetooth module is a reliable wireless transceiver that supports both master and slave modes, making it perfect for Arduino, ESP32, Raspberry Pi, and other microcontroller projects. With easy UART interface and AT command configuration, it enables seamless wireless data transfer, remote control, and IoT connectivity. Ideal for robotics, automation, and DIY electronics.
SKU: n/a -
Sensor Boards And Modules
Joystick Module
A joystick module is an input device that allows users to control movement or direction in various applications, such as gaming, robotics, and industrial control systems. It typically consists of two potentiometers (one for each axis) and various buttons or switches.
SKU: n/a -
Sensor Boards And Modules
Flame Sensor Module
Infrared fire detection sensor designed for Arduino, Raspberry Pi, and robotics projects. With high sensitivity, fast response, and 0–5V output, it reliably detects flame presence for safety alarms, fire‑fighting robots, and automation systems. Compact and easy to integrate, this module is ideal for DIY electronics, smart security setups, and educational kits. Perfect for students, hobbyists, and professionals building fire detection, safety monitoring, or intelligent robotics applications
SKU: n/a -
Sensor Boards And Modules
MQ 7 Gas Sensor Module
This gas sensor module MQ-7 is a gas sensor module specifically designed to detect levels of carbon monoxide (CO) gas in the environment. The gas sensor module MQ-7 is widely used in various applications such as gas leakage detection, industrial safety systems, and environmental monitoring.
SKU: n/a
There are no reviews yet.