Shop
Showing 121–135 of 330 resultsSorted by popularity
-
Drone Spare Parts And Accessories
Flysky FS-Ct6b 2.4Ghz 6Channel Rc Transmitter And Receiver
The FlySky FS-CT6B is a popular 6-channel transmitter and receiver system used for controlling drones, quadcopters, and other RC models. Here are some key features:
Channels: 6 channels for versatile control options.
Frequency: Operates on 2.4 GHz for reliable signal transmission.
Power: Can be powered by 8 x AA batteries or a 12V power supply.
Weight: Approximately 696 g.
Dimensions: 180 x 220 x 70 mm (LxWxH).
Operation Mode: Left stick Throttle
Modulation: Uses Frequency Modulation (FM).
Antenna Length: 88 mm.
Code Type: PPM/GFSK.
Application: Suitable for multirotors, RC planes, RC boats, and RC helicopters.
Additional Features
Trainer Port: Allows for a trainer port to help beginners learn flying.Configuration: Can be configured using T6 config software on a computer.
Anti-Jamming: Equipped with super active and passive anti-jamming capabilities.
Low Power Consumption: Very low power consumption for extended use.
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Orange Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Orange
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Yellow Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Yellow
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Green Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Green
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Red Diffused (Pack of 5 pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Red
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Others
On Off Switch 2pin SPST
A 2-pin SPST (Single Pole Single Throw) on-off switch is a simple and commonly used switch in electronic circuits. It has two terminals and is used to control a single circuit, either turning it on or off1. Here are some key features:
Simple ON/OFF control: Ideal for straightforward on/off applications.
Compact design: Suitable for PCBs (Printed Circuit Boards) and various electronic projects.
Versatile usage: Can be used in household appliances, DIY electronics, and hobbyist projects.
SKU: n/a -
Resistors
Resistor 330E Ohms 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 330E Ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 330 Ohm
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 330 Ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 220E Ohm 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 220E Ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 220 Ohm
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 220 Ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 100E Ohms 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 100E Ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 100 Ohm
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 100 Ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 10E Ohms 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 10E Ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 10 Ohm
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 10 Ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 4.7E Ohm 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 4.7E Ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 4.7 Ohm
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 4.7 Ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 1E 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 1e ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 1e ohm (1 ohms)
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 1e ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 100K 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 100k ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 100k ohm (1,00,000 ohms)
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 100k ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 33K 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 33k ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 33k ohm (33000 ohms)
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 33k ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a -
Resistors
Resistor 10K 1/4w 5% Tolerance (Pack of 5pcs)
Resistors limit the flow of electrical current in a circuit. They are used to adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses.
A 10k ohm, 1/4 watt, 5% tolerance resistor is a common type of resistor used in electronic circuits. Here’s a detailed description:
Resistance: 10k ohm (10000 ohms)
Power Rating: 1/4 watt (0.25 watts)
Tolerance: 5%, meaning the actual resistance can vary by up to ±5% from the specified 10k ohm
Type: Often available as carbon film or metal film resistors
Package: Typically in a through-hole (DIP) package, which is easy to use in breadboards and PCBs
The resistor can be identified with the color bands. The chart is available for your reference.
These resistors are used for current limiting, voltage division, and many other applications in electronic circuits.
SKU: n/a
