Servo Motor Deao 40kg-360*
Heavy‑duty Deao 40kg 360° continuous rotation servo motor with metal gears for maximum torque and durability. Provides smooth continuous rotation, stable performance, and long service life. Perfect for large robotics, RC vehicles, automation systems, and DIY engineering projects requiring powerful motion control.
Technical Specifications:
- Model: Deao 40kg 360° Servo Motor
- Torque: ~40 kg·cm at 7.4V
- Rotation Angle: 360° continuous rotation
- Gear Type: Full metal gears for strength and durability
- Operating Voltage: 6V – 7.4V DC
- Speed: ~0.14 sec/60° at 7.4V
- Connector: Standard 3‑pin (PWM control)
- Dimensions: ~40 × 20 × 40 mm approx.
- Applications: Heavy robotics, RC cars/boats, industrial automation, Arduino/DIY projects
₹1,275.00 exc. GST
Based on 0 reviews
Be the first to review “Servo Motor Deao 40kg-360*”
You may also like…
-
Motors And Motor Drivers
PCA9685 16 Channel Servo Motor Driver
PCA9685 16 Channel Servo Motor Driver – Control Multiple Servos Effortlessly!
The PCA9685 is a 16-channel PWM servo driver that uses the I2C bus for control, making it easy to drive up to 16 servos with just two pins. It’s perfect for robotics, automation, and multi-servo projects.SKU: n/a -
Nodemcu And ESP
ESP32 C3 Supermini Board
Ultra‑compact ESP32‑C3 SuperMini development board with Wi‑Fi + Bluetooth 5.0 (BLE) support. Powered by the RISC‑V single‑core processor, it offers low‑power performance, GPIO expansion, and USB‑C connectivity. Perfect for IoT projects, smart devices, Arduino/ESP‑IDF development, and DIY electronics.
Technical Specifications:
- Model: ESP32‑C3 SuperMini
- Processor: 32‑bit RISC‑V single‑core @ 160 MHz
- Flash: 4 MB
- Connectivity: Wi‑Fi 802.11 b/g/n, Bluetooth 5.0 (BLE)
- USB Port: USB‑C for programming and power
- Operating Voltage: 3.3V (logic), 5V (via USB‑C)
- GPIO Pins: Multiple digital I/O, PWM, ADC, UART, SPI, I2C
- Dimensions: Ultra‑small form factor for compact projects
- Applications: IoT devices, smart home automation, wearable electronics, Arduino/ESP‑IDF projects
SKU: n/a -
Nodemcu And ESP
Esp32 30Pin Devkit V1 Expansion Board
Versatile breakout board designed for 30-pin ESP32 development modules. Features a USB Type-C connector for stable 5V power delivery, improving durability and compatibility with modern power sources. All GPIOs, control, and power pins are broken out to clearly labeled 2.54mm pitch headers, including EN, IO0, TX/RX, 3V3, and GND, ensuring easy access for prototyping and integration.
The board includes onboard BOOT and RESET buttons for seamless firmware flashing and debugging. Its compact, breadboard-friendly layout supports rapid development and testing in embedded applications. Ideal for IoT, automation, and sensor-based projects, this expansion board simplifies ESP32 deployment in both educational and professional environments.SKU: n/a -
Motors And Motor Drivers
L298N Motor Driver Module
The L298N motor driver module is a high-power driver designed to control DC motors and stepper motors. It features a double H-bridge design, allowing for direction and speed control of two DC motors or one stepper motor. The module supports up to 2A of current and 25W of power.
SKU: n/a
Related products
-
Motors And Motor Drivers
Servo Motor MG 995-180*
The Servo Motor MG995-180* Tower Pro is a high-performance, high-torque digital servo motor commonly used in hobby and robotics projects. Here are some detailed features:Weight: Approximately 55 gramsDimensions: 40.7 x 19.7 x 42.9 mmStall Torque: 8.5 kgf/cm at 4.8V and 10 kgf/cm at 6VOperating Speed: 0.2 seconds/60° at 4.8V and 0.16 seconds/60° at 6VRotation Angle: 120° (60° in each direction)Operating Voltage: 4.8V to 7.2VGear Type: Metal gears for durability and reliabilityTemperature Range: 0°C to 55°CAdditional Features: Dual ball-bearing design for shock-proof operation, making it suitable for industrial production and consumer roboticsThe MG995 is widely used in airplanes, helicopters, RC cars, and other RC models due to its high torque and fast response timeSKU: n/a -
Motors And Motor Drivers
L293d Motor Control Shield For Arduino
L293D Motor Control Shield – Drive Multiple Motors with Ease!
This shield allows you to control up to 4 DC motors, 2 stepper motors, or 2 servo motors using an Arduino board. It features two L293D motor driver ICs and a 74HC595 shift register for extended pin control.
SKU: n/a -
Motors And Motor Drivers
Servo Motor MG 996-360*
The Servo Motor MG996-360* Tower Pro motor is an upgraded version of the MG995 servo motor, offering high torque and precision for various applications. Here are some detailed features:Weight: Approximately 55 grams.Dimensions: 40.7 x 19.7 x 42.9 mm.Stall Torque: 9.4 kg/cm at 4.8V and 11 kg/cm at 6V.Operating Speed: 0.19 seconds/60° at 4.8V and 0.15 seconds/60° at 6V.Rotation Angle: 360 degreesOperating Voltage: 4.8V to 6.6V.Gear Type: Metal gears for durability and reliability.Dead Band Width: 1μs.Wire Length: 32 cm.Additional Features: Upgraded PCB and IC control system for improved accuracy, internal gearing and motor upgrades for better dead band and centering, and a stable, shock-proof double ball-bearing design.SKU: n/a -
Drone Spare Parts And Accessories, Motors And Motor Drivers
BLDC Motor A2212 1000Kv
The A2212 1000KV BLDC Brushless DC Motor is a popular choice for drone enthusiasts and hobbyists. Here are its key features:
Key Features
Motor KV: 1000, meaning it spins 1000 times per minute (RPM) per volt applied.Current Capacity: Rated from 6- 12A
Shaft Diameter: 3.17 mm, compatible with standard prop adapters.
Efficiency Current: Operates efficiently between 4-10A.
Bi-Directional: Can rotate in both clockwise (CW) and counter-clockwise (CCW) directions by swapping the polarity of the input supply.
Material: Steel design for durability and lightweight for various quadcopter and hexacopter frames.
Package Includes: Motor, prop adapter, motor holder (X-type), and screws.
Applications
Drone Motors: Ideal for quadcopters, hexacopters, and other multirotor drones.Educational Projects: Great for learning about motor control and drone building.
Hobby Projects: Perfect for custom drone builds and modifications.
SKU: n/a
There are no reviews yet.