2000W SCR Module
The 2000W SCR Module is a high-power thyristor voltage regulator designed for controlling appliances up to 2000W. It operates on AC 220V and allows adjustable voltage from 0-220V. Ideal for light dimming, fan speed control, and temperature regulation.
₹75.00 exc. GST
Based on 0 reviews
Be the first to review “2000W SCR Module”
Related products
-
Sensor Boards And Modules
GPS Module Neo 6m
The u-blox GPS module NEO-6M is a widely used GPS (Global Positioning System) module that provides accurate positioning and timing information. It is a compact and cost-effective module commonly used in various applications, including navigation systems, vehicle tracking, drones, and location-based projects.
Here are some key features and information about the NEO-6M GPS module:
- Positioning Accuracy: The module can provide positioning accuracy within a few meters, depending on the quality of the received satellite signals and other factors. It supports the simultaneous reception of up to 50 satellites from GPS, GLONASS, and other positioning systems.
- Communication Interface: The module communicates with a microcontroller or other devices using a serial communication interface, typically UART (Universal Asynchronous Receiver-Transmitter). It uses standard NMEA (National Marine Electronics Association) protocol to transmit GPS data.
- Output Data: The module provides various data outputs, including latitude, longitude, altitude, velocity, date, time, and satellite information. The data is typically in the NMEA format, which can be easily parsed and processed by microcontrollers or software applications.
- Power Supply: The module operates on a 3.3V power supply and consumes relatively low power, making it suitable for battery-powered applications.
- Configuration: The GPS NEO-6M module can be configured using specific AT (Attention) commands sent over the serial interface. These commands allow you to adjust parameters such as update rate, baud rate, and output message formats.
When using the GPS module NEO-6M, it’s essential to provide a clear view of the sky to ensure better satellite reception. Additionally, integrating the module with a microcontroller or other processing unit enables you to make use of the GPS data for your specific application.
SKU: n/a -
Sensor Boards And Modules
IR Sensor Module
An IR sensor module(infrared sensor module) is a device that detects infrared radiation and is commonly used for proximity sensing, object detection, and motion detection.
IR sensor modules can operate in different sensing modes, including proximity sensing and motion detection. Proximity sensing detects the presence of an object within a specific range, while motion detection detects movement within the sensor’s field of view.SKU: n/a -
Sensor Boards And Modules
Ultrasonic Sensor HC-SR04
The ultrasonic sensor HC-SR04 is a popular sensor module used for distance measurement in various projects and applications. It is commonly used with microcontrollers such as Arduino for obstacle detection, object avoidance, and distance sensing.
The sensor HC-SR04 typically has four pins: VCC (power supply), GND (ground), Trig (trigger), and Echo (echo signal output). It requires both 5V power supply and a separate GPIO pin to trigger the sensor and read the echo signal.
SKU: n/a -
Sensor Boards And Modules
HC 05 Bluetooth Module
The HC-05 is a popular Bluetooth module commonly used for wireless communication between electronic devices. It is based on the Bluetooth 2.0+EDR (Enhanced Data Rate) standard and is designed for easy integration into various projects.
The module allows devices to establish a Bluetooth connection and communicate wirelessly over short distances, typically up to 10 meters. It supports both the Bluetooth Serial Port Profile (SPP) and the Bluetooth Master-Slave mode, making it compatible with a wide range of devices and applications.
SKU: n/a
There are no reviews yet.