Shop
Showing 301–315 of 330 resultsSorted by popularity
-
Nodemcu And ESP
Wemos D1 Mini Board
Wemos D1 Mini Board – Compact and Versatile!The Wemos D1 Mini Board is a small yet powerful Wi-Fi development board based on the ESP8266 microcontroller. Ideal for hobbyists, makers, and DIY enthusiasts.
Here are some key features:Microcontroller: ESP8266 running at 80/160 MHzDigital I/O Pins: 11 pins with PWM, I2C, and One-Wire supportAnalog Input Pin: 1 pin with 3.2V max inputFlash Memory: 4MBIntegrated Wi-Fi: 802.11 b/g/nOperating Voltage: 3.3VPerfect for IoT projects, home automation, and smart devices!SKU: n/a -
Nodemcu And ESP
Wemos D1 Board
Wemos D1 Board – Compact Wi-Fi Development Board!The Wemos D1 Board is a small yet powerful Wi-Fi development board based on the ESP8266 microcontroller, perfect for hobbyists, makers, and DIY enthusiasts. Here are some key features:Microcontroller: ESP8266 running at 80/160 MHz.Digital I/O Pins: 11 pins (except D0) with PWM, I2C, and One-Wire support.Analog Input Pins: 1 pin with a maximum input of 3.2V.Clock Speed: 80/160 MHz for efficient performance.Flash Memory: 4MB for storing programs and data.Integrated Wi-Fi: 802.11 b/g/n for wireless connectivity.USB-to-Serial Converter: CH340G for easy programming and communication.Operating Voltage: 3.3V.Size: Compact form factor, making it ideal for projects with space constraints.Perfect for IoT projects, home automation, and smart devices!SKU: n/a -
Arduino Boards
Arduino Pro Micro
Arduino Pro Micro Clone Board – Compact and Versatile!The Arduino Pro Micro Clone Board is a small yet powerful microcontroller perfect for hobbyists, makers, and DIY enthusiasts. Here are some key features:Microcontroller: ATmega32U4 running at 16 MHz.Digital I/O Pins: 12 pins for versatile control.Analog Input Pins: 4 pins with 10-bit ADC.PWM Pins: 5 pins for precise control of devices.USB Connection: Built-in USB-to-serial converter for easy programming and communication.Operating Voltage: 5V, with a built-in voltage regulator allowing input up to 12VDC.Size: Compact form factor, making it ideal for projects with space constraints.Perfect for USB HID projects, robotics, and embedded systems!SKU: n/a -
Sensor Boards And Modules
Arduino TFT Shield 2.4 inch with capacitive touch
Arduino TFT Shield 2.4 Inch Touch Screen – Interactive Display Module!
The Arduino TFT 2.4 Inch Shield Touch Screen features a 240×320 resolution, integrated touch panel, and a microSD card slot. Ideal for creating interactive projects, data visualizations, and smart home dashboards.
Perfect for adding a touch interface to your Arduino projects!
SKU: n/a -
Arduino Boards
Arduino Mega CH340 Board
Designed for ambitious builds, the Mega 2560 CH340 combines the robust ATmega2560 microcontroller with the cost-effective CH340 USB-to-Serial interface. With 54 digital I/O pins, 16 analog inputs, and 4 UARTs, it’s perfect for complex robotics, automation, and data-heavy applications. Full Arduino IDE support and reliable USB connectivity make it a smart choice for makers and professionals alike.
SKU: n/a -
Motors And Motor Drivers
Servo Motor MG 996-360*
The Servo Motor MG996-360* Tower Pro motor is an upgraded version of the MG995 servo motor, offering high torque and precision for various applications. Here are some detailed features:Weight: Approximately 55 grams.Dimensions: 40.7 x 19.7 x 42.9 mm.Stall Torque: 9.4 kg/cm at 4.8V and 11 kg/cm at 6V.Operating Speed: 0.19 seconds/60° at 4.8V and 0.15 seconds/60° at 6V.Rotation Angle: 360 degreesOperating Voltage: 4.8V to 6.6V.Gear Type: Metal gears for durability and reliability.Dead Band Width: 1μs.Wire Length: 32 cm.Additional Features: Upgraded PCB and IC control system for improved accuracy, internal gearing and motor upgrades for better dead band and centering, and a stable, shock-proof double ball-bearing design.SKU: n/a -
Motors And Motor Drivers
Servo Motor MG 995-180*
The Servo Motor MG995-180* Tower Pro is a high-performance, high-torque digital servo motor commonly used in hobby and robotics projects. Here are some detailed features:Weight: Approximately 55 gramsDimensions: 40.7 x 19.7 x 42.9 mmStall Torque: 8.5 kgf/cm at 4.8V and 10 kgf/cm at 6VOperating Speed: 0.2 seconds/60° at 4.8V and 0.16 seconds/60° at 6VRotation Angle: 120° (60° in each direction)Operating Voltage: 4.8V to 7.2VGear Type: Metal gears for durability and reliabilityTemperature Range: 0°C to 55°CAdditional Features: Dual ball-bearing design for shock-proof operation, making it suitable for industrial production and consumer roboticsThe MG995 is widely used in airplanes, helicopters, RC cars, and other RC models due to its high torque and fast response timeSKU: n/a -
Sensor Boards And Modules
Step Up Module MT3608
This is a popular step up module MT3608 (boost) voltage regulator module, that allows you to increase a lower input voltage to a higher, regulated output voltage. It is commonly used in projects where a higher voltage is required for powering devices or components
SKU: n/a -
-
Sensor Boards And Modules
Joystick Module
A joystick module is an input device that allows users to control movement or direction in various applications, such as gaming, robotics, and industrial control systems. It typically consists of two potentiometers (one for each axis) and various buttons or switches.
SKU: n/a -
Sensor Boards And Modules
GSM SIM 800L TTL Board
The GSM SIM 800L TTL board is a compact module that provides GSM/GPRS communication capabilities. It allows you to establish a cellular connection and communicate over the GSM network using a SIM card.
The board is commonly used in applications such as IoT projects, remote monitoring, tracking systems, and other projects that require cellular connectivity.SKU: n/a -
Sensor Boards And Modules
MQ 8 Gas Sensor Module
The MQ 8 gas sensor module is designed to detect levels of hydrogen gas (H2) in the environment. The MQ-8 gas sensor module is commonly used in applications such as gas leak detection, hydrogen gas monitoring in industrial settings, and hydrogen fuel cell monitoring.
The gas sensor is mounted on the PCB with TTL pins which makes it very easy to use it with controllers like Arduino, Raspberry PI, ESP, etc. with the simple help of jumper wires.SKU: n/a -
Sensor Boards And Modules
MQ 7 Gas Sensor Module
This gas sensor module MQ-7 is a gas sensor module specifically designed to detect levels of carbon monoxide (CO) gas in the environment. The gas sensor module MQ-7 is widely used in various applications such as gas leakage detection, industrial safety systems, and environmental monitoring.
SKU: n/a -
Sensor Boards And Modules
Dual Usb Power bank Module
A dual usb power bank module with a micro USB interface is a module that allows you to create a power bank with two USB outputs using micro USB as the input interface. This module typically includes the necessary circuitry for charging and discharging, as well as voltage regulation and protection features.
SKU: n/a -
Sensor Boards And Modules
DHT 11 Temperature and Humidity Sensor
This DHT11 is a sensor that combines both temperature and humidity sensing capabilities in a single package. It is not available as a standalone temperature-only or humidity-only sensor.
The temperature and humidity sensor DHT11 includes a built-in resistive humidity sensor and a thermistor for temperature measurement. These two sensing elements work together to provide temperature and humidity readings.
This sensor module communicates with a microcontroller or other digital devices using a digital signal. It sends data in a serial format, where the microcontroller can read the temperature and humidity values from the sensor.
SKU: n/a
