Shop
Showing 76–90 of 330 results
-
Sensor Boards And Modules
ADS1115 ADC-4 Channel Module
ADS1115 Module – High-Precision ADC!
The ADS1115 is a 16-bit ADC with 4 input channels, operating from 2.0V to 5.5V. It supports the I2C protocol for easy integration and has a programmable gain amplifier. Ideal for sensor data collection, environmental monitoring, and industrial automation.
SKU: n/a -
Sensor Boards And Modules
ADXL335 Module
ADXL335 Module – Compact 3-Axis Accelerometer!
ADXL335 module measures acceleration in X, Y, and Z directions with a range of ±3g. It features analog voltage outputs, low power consumption, and is easy to interface with microcontrollers. Ideal for motion sensing, gaming devices, and tilt detection.SKU: n/a -
Sensor Boards And Modules
ADXL345 Module
The ADXL345 module is a compact, low-power 3-axis accelerometer with high resolution (13-bit) measurement, capable of detecting tilt, motion, and shock. It supports both SPI and I2C interfaces, making it easy to integrate with microcontrollers. Ideal for applications in mobile devices, gaming, and health monitoring
SKU: n/a -
Sensor Boards And Modules
Analog pH Sensor Kit with Probe
This analog pH sensor kit includes a high-sensitivity glass electrode probe and a signal conditioning board that outputs a voltage proportional to the pH level. Ideal for water quality monitoring, hydroponics, aquariums, and lab experiments.
🔧 Technical Details:
- Measurement Range: pH 0–14
- Output Signal: 0–5V analog (compatible with microcontroller ADCs)
- Operating Voltage: 5V DC
- Accuracy: ±0.1 pH (with proper calibration)
- Interface: 3-pin header (VCC, GND, Analog Out)
- Probe Connector: BNC
- Calibration: Manual trimmer potentiometer on board
- Temperature Range: 0°C to 60°C (probe dependent)
- Cable Length: ~1 meter
This kit is plug-and-play with Arduino, ESP32, and other platforms, and can be calibrated using standard buffer solutions (pH 4.0, 7.0, 10.0) for reliable readings
SKU: n/a -
Drone Spare Parts And Accessories
ArduCopter APM 2.8 Flight Controller Board
The APM 2.8 flight controller is a versatile and open-source autopilot system designed for various unmanned aerial and ground vehicles. Here’s a quick overview:
Key Features
Built-in Compass: Integrated compass for improved directional accuracy.Processor: ATmega2560 (main microcontroller) and ATmega32U2 (USB connectivity).
Sensors: MPU-6000 6 DoF Accelerometer/Gyro, MS5611-01BA03 barometric pressure sensor.
Memory: 4 MegaByte Dataflash chip for automatic data logging.
Power: Supports external power modules for voltage and current monitoring.
Flight Modes: Manual, Stabilize, Altitude Hold, Loiter, Return to Launch (RTL), Auto (Waypoint Navigation), and more.
Connectivity: USB for programming, telemetry port for real-time data monitoring, and PWM outputs for motor control.
Applications
Multirotors: Ideal for quadcopters, hexacopters, and other multirotor configurations.Fixed-Wing Planes: Suitable for fixed-wing aircraft.
Rovers: Can be used for ground vehicles.
Autonomous Missions: Capable of executing complex missions with waypoints
SKU: n/a -
Sensor Boards And Modules
Arduino Camera Module OV7670 CMOS
The OV7670 camera module is a low-cost, 0.3MP CMOS image sensor designed for embedded vision applications. It captures 640×480 VGA resolution at up to 30fps and communicates via an 8-bit parallel interface. Ideal for Arduino and microcontroller projects, it supports YUV, RGB, and JPEG formats (with external encoding) and includes onboard registers for exposure, gain, and color balance control. Compact and lightweight, it’s commonly used in robotics, surveillance, and image processing experiments
SKU: n/a -
Arduino Boards
Arduino Mega CH340 Board
Designed for ambitious builds, the Mega 2560 CH340 combines the robust ATmega2560 microcontroller with the cost-effective CH340 USB-to-Serial interface. With 54 digital I/O pins, 16 analog inputs, and 4 UARTs, it’s perfect for complex robotics, automation, and data-heavy applications. Full Arduino IDE support and reliable USB connectivity make it a smart choice for makers and professionals alike.
SKU: n/a -
Arduino Boards
Arduino Mega R3 Board
Unleash advanced projects with the Mega 2560 R3, powered by the ATmega2560 microcontroller. Featuring 54 digital I/O pins, 16 analog inputs, and 4 serial ports, it’s perfect for robotics, automation, and complex embedded systems. With expanded memory and seamless Arduino IDE support, this board is your go-to platform for serious prototyping and scalable innovation.
SKU: n/a -
Arduino Boards
Arduino Nano CH340 Soldered Board
The Arduino Nano is a compact and versatile microcontroller board based on the ATmega328P or ATmega168.
Here are its key features:
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage: 7-12V (recommended)
Digital I/O Pins: 14 (6 PWM outputs)
Analog Input Pins: 8
Flash Memory: 32 KB (ATmega328P), 2 KB used by bootloader
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz
USB: Mini-B USB connector for power and programming
Ideal for embedded projects and prototyping due to its small size and flexibility. 😊
SKU: n/a -
Arduino Boards
Arduino Nano Ch340 Soldered Board Type C
The Arduino Nano is a compact microcontroller board based on the ATmega328P, featuring 30 soldered male header pins for easy prototyping. This variant includes a CH340 USB-to-serial converter and a USB Type-C port, offering modern connectivity and reliable programming.
⚙️ Key Technical Details:
• Microcontroller: ATmega328P, 8-bit AVR, 16 MHz clock speed
• USB Interface: CH340G IC handles serial communication via USB Type-C
• Power Supply:
• VIN: 6–12V input
• 5V & 3.3V: Regulated outputs for peripherals
• USB VBUS: Supplies 5V when connected via Type-C
• I/O Pins:
• Digital: 14 (D0–D13), including PWM on D3, D5, D6, D9, D10, D11
• Analog: 8 (A0–A7), 10-bit ADC resolution
• Serial: UART (TX: D1, RX: D0), SPI (D10–D13), I2C (A4: SDA, A5: SCL)
• Flash Memory: 32 KB (2 KB used by bootloader)
• SRAM: 2 KB
• EEPROM: 1 KB
🔌 Type-C Connector Notes:
• Supports USB 2.0 data lines (D+/D−) routed to CH340
• VBUS and GND provide power input
• CC pins typically tied to ground via pull-down resistors for cable orientation
This Nano variant is ideal for embedded systems, sensor networks, and compact automation projects—especially where modern USB compatibility and robust serial communication are essential.SKU: n/a -
Arduino Boards
Arduino Nano Unsoldered Board
An unsoldered Arduino Nano board is essentially an Arduino Nano that has had its header pins removed. This can be useful if you want to integrate the Nano into a custom PCB or project without the bulk of the headers. The Arduino Nano is a compact and versatile microcontroller board based on the ATmega328P or ATmega168. Here are its key features:
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended)
- Digital I/O Pins: 14 (6 PWM outputs)
- Analog Input Pins: 8
- Flash Memory: 32 KB (ATmega328P), 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- USB: Mini-B USB connector for power and programming
Ideal for embedded projects and prototyping due to its small size and flexibility.
SKU: n/a -
Arduino Boards
Arduino Pro Micro
Arduino Pro Micro Clone Board – Compact and Versatile!The Arduino Pro Micro Clone Board is a small yet powerful microcontroller perfect for hobbyists, makers, and DIY enthusiasts. Here are some key features:Microcontroller: ATmega32U4 running at 16 MHz.Digital I/O Pins: 12 pins for versatile control.Analog Input Pins: 4 pins with 10-bit ADC.PWM Pins: 5 pins for precise control of devices.USB Connection: Built-in USB-to-serial converter for easy programming and communication.Operating Voltage: 5V, with a built-in voltage regulator allowing input up to 12VDC.Size: Compact form factor, making it ideal for projects with space constraints.Perfect for USB HID projects, robotics, and embedded systems!SKU: n/a -
Arduino Boards
Arduino Pro Mini 3.3V Atmega328p
The Arduino Pro Mini operates on 3.3V and has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an onboard resonator, a reset button, and holes for mounting pin headers having 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
SKU: n/a -
Arduino Boards
Arduino Pro Mini 5v Atmega328p
The Arduino Pro Mini operates on 3.3V and has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an onboard resonator, a reset button, and holes for mounting pin headers having 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.
SKU: n/a
