Shop
Showing 151–165 of 354 results
-
Sensor Boards And Modules
Flex Sensor 2.2 inch
Enhance your projects with the 2.2‑inch flex sensor, a thin, bendable resistor that changes resistance based on the degree of bend. Compact and lightweight, it’s perfect for Arduino, ESP32, and other microcontroller platforms, enabling accurate motion tracking and gesture recognition. Widely used in wearable electronics, robotics, gaming controllers, and DIY projects, this sensor provides reliable performance for detecting angular displacement and finger or joint movements.
SKU: n/a -
Others
Flow Solder Female Header Pin 40 x 1
A 40×1 flow solder strip is a type of female header connector used in electronics for connecting printed circuit boards (PCBs) to other components or modules. Here are some key details:
Key Features:
Pitch: 2.54mm (standard spacing)Number of Pins: 40 pins in a single row
Material: Typically made of brass or other conductive metals
Mounting Type: Through-hole mounting
Height: Around 6mm
Applications:
PCB Prototyping: Ideal for connecting prototype boards to other components or modulesBreadboards: Used to connect PCBs to breadboards for testing and development
Custom Cables: Can be used to create custom cables for various electronic projects
Industrial and Hobbyist Use: Suitable for a wide range of applications in both professional and hobbyist electronics
SKU: n/a -
Drone Spare Parts And Accessories
Flysky FS-Ct6b 2.4Ghz 6Channel Rc Transmitter And Receiver
The FlySky FS-CT6B is a popular 6-channel transmitter and receiver system used for controlling drones, quadcopters, and other RC models. Here are some key features:
Channels: 6 channels for versatile control options.
Frequency: Operates on 2.4 GHz for reliable signal transmission.
Power: Can be powered by 8 x AA batteries or a 12V power supply.
Weight: Approximately 696 g.
Dimensions: 180 x 220 x 70 mm (LxWxH).
Operation Mode: Left stick Throttle
Modulation: Uses Frequency Modulation (FM).
Antenna Length: 88 mm.
Code Type: PPM/GFSK.
Application: Suitable for multirotors, RC planes, RC boats, and RC helicopters.
Additional Features
Trainer Port: Allows for a trainer port to help beginners learn flying.Configuration: Can be configured using T6 config software on a computer.
Anti-Jamming: Equipped with super active and passive anti-jamming capabilities.
Low Power Consumption: Very low power consumption for extended use.
SKU: n/a -
Drone Spare Parts And Accessories
Flysky FS-i6 2.4Ghz 6Channel Rc Transmitter And Reciever
The FlySky FS-i6 is a versatile 6-channel transmitter for controlling various RC models:
Key Features
Channels: 6Frequency: 2.4 GHz
Power: 6 x AA batteries or 12V power supply
Weight: 400 g
Operation Modes: Left stick throttle
Antenna Length: Dual antennas, each 26 mm
Code Type: PPM/GFSK
Additional Features
Trainer Port: For helping beginners learn to fly.Configuration Software: Customizable settings with T6 config software.
Anti-Jamming: Super active and passive anti-jamming capabilities.
Low Power Consumption: Ensures extended usage without frequent battery changes.
SKU: n/a -
PCB And Breadboards
General Purpose PCB 5 x 7cms
The 5×7 cm General Purpose PCB is a compact and versatile prototyping board designed for electronic projects.
Here are the key details:Size: 5 cm x 7 cm
Material: High-quality fiberglass (FR4)
Layer: Single-sided with copper pads
Hole Pitch: 2.54 mm (standard grid layout)
Hole Diameter: Approximately 1 mm
Surface Finish: Tin-plated or bare copper for easy soldering
Applications
Prototyping: Ideal for developing and testing electronic circuits.DIY Projects: Suitable for hobbyists and professionals working on custom electronic devices.
Educational Use: Great for educational projects and workshops focused on electronics.
SKU: n/a -
PCB And Breadboards
General Purpose PCB 9 x 15cms
The General Purpose PCB 9×15 cm (Brown, Single-Sided) is ideal for prototyping and testing electronic circuits.
Here are the key details:Size: 9 cm x 15 cm
Material: Durable phenolic or fiberglass substrate
Layer: Single-sided copper layer
Hole Diameter: 1.0 mm
Hole Pitch: 2.54 mm (standard grid layout)
Surface Finish: Tin-plated or bare copper
Applications
Prototyping and Testing: Great for developing and testing circuits.
DIY Projects: Suitable for custom electronics projects.
Educational Use: Ideal for learning electronics.
This PCB provides a reliable platform for building and testing circuits.
SKU: n/a -
Sensor Boards And Modules
GPS Module Neo 6m
The u-blox GPS module NEO-6M is a widely used GPS (Global Positioning System) module that provides accurate positioning and timing information. It is a compact and cost-effective module commonly used in various applications, including navigation systems, vehicle tracking, drones, and location-based projects.
Here are some key features and information about the NEO-6M GPS module:
- Positioning Accuracy: The module can provide positioning accuracy within a few meters, depending on the quality of the received satellite signals and other factors. It supports the simultaneous reception of up to 50 satellites from GPS, GLONASS, and other positioning systems.
- Communication Interface: The module communicates with a microcontroller or other devices using a serial communication interface, typically UART (Universal Asynchronous Receiver-Transmitter). It uses standard NMEA (National Marine Electronics Association) protocol to transmit GPS data.
- Output Data: The module provides various data outputs, including latitude, longitude, altitude, velocity, date, time, and satellite information. The data is typically in the NMEA format, which can be easily parsed and processed by microcontrollers or software applications.
- Power Supply: The module operates on a 3.3V power supply and consumes relatively low power, making it suitable for battery-powered applications.
- Configuration: The GPS NEO-6M module can be configured using specific AT (Attention) commands sent over the serial interface. These commands allow you to adjust parameters such as update rate, baud rate, and output message formats.
When using the GPS module NEO-6M, it’s essential to provide a clear view of the sky to ensure better satellite reception. Additionally, integrating the module with a microcontroller or other processing unit enables you to make use of the GPS data for your specific application.
SKU: n/a -
Sensor Boards And Modules
GSM GPS SIM 808 Module
SIM808 GSM/GPS module with quad-band GSM (850/900/1800/1900 MHz) and high-sensitivity GPS receiver, ideal for Arduino, ESP32, and Raspberry Pi projects. Supports voice, SMS, GPRS data, and GPS positioning in a compact, low-power design—perfect for IoT, vehicle tracking, and smart device applications.
🔧 Key Specifications
- GSM Bands: Quad-band 850/900/1800/1900 MHz
- Functions: Voice calls, SMS, GPRS data, GPS positioning
- GPS: High sensitivity receiver, fast TTFF (Time to First Fix)
- Interface: UART, easily compatible with Arduino, ESP32, Raspberry Pi
- Power Supply: 3.4V–4.4V (typical 4V)
- Form Factor: Compact design for embedded and DIY projects
- Applications: IoT devices, vehicle tracking, fleet management, smart electronics
SKU: n/a -
Sensor Boards And Modules
GSM SIM 800L TTL Board
The GSM SIM 800L TTL board is a compact module that provides GSM/GPRS communication capabilities. It allows you to establish a cellular connection and communicate over the GSM network using a SIM card.
The board is commonly used in applications such as IoT projects, remote monitoring, tracking systems, and other projects that require cellular connectivity.SKU: n/a -
Sensor Boards And Modules
GSM SIM 900A V4.0
The SIM900A V4.0 GSM GPRS Module is a compact and versatile communication module designed for wireless data transmission and mobile network connectivity. It features:
– Dual Power Supply Options: Supports 5V (VCC5) and 3.5–4.5V (VCC4) power inputs.
– Antenna Interfaces: Comes with SMA (default) and IPXmini antenna options for strong signal reception.
– Serial Communication: Compatible with TTL-level UART, supporting 3.3V and 5V microcontrollers.
– SIM Card Slot: Designed for 2G networks, supporting mobile phone 3G/4G cards.
– Low Power Mode: Standby mode consumes as low as 10mA, ensuring energy efficiency.
– Onboard Reset & Protection: Includes SMF05C ESD protection for SIM card circuits.
This module is widely used in IoT applications, remote monitoring, SMS-based control systems, and embedded projects requiring GSM/GPRS connectivitySKU: n/a -
Others
GSM Spring Antenna 2.4Ghz 3DBI
This 3dBi spring-type GSM antenna is tuned for 2.4GHz applications and features an SMA male connector for secure, low-loss RF connectivity. Its compact helical design offers mechanical flexibility and durability, making it ideal for wireless modules, telemetry systems, and IoT devices operating in the 2.4GHz ISM band.
⚙️ Technical Specifications:
• Frequency Range: 2400–2500 MHz
• Gain: 3dBi nominal
• Impedance: 50Ω
• VSWR: ≤ 2.0
• Connector: SMA male (standard polarity)
• Polarization: Vertical
• Material: Copper spring with protective coating
• Wire Length: ~3 mtrs.
• Applications: GSM, Wi-Fi, Bluetooth, Zigbee, telemetry, and RF remote systemsSKU: n/a -
Others
GSM Spring Antenna 2.4Ghz 5DBI
This high-gain 5dBi GSM spring antenna is optimized for 2.4GHz wireless applications and features a rugged SMA male connector for secure RF interfacing. Its helical spring design ensures mechanical flexibility and durability, making it ideal for long-range telemetry, IoT deployments, and RF modules operating in the 2.4GHz ISM band.
⚙️ Technical Specifications:
- Frequency Range: 2400–2500 MHz
- Gain: 5dBi nominal
- Impedance: 50Ω
- VSWR: ≤ 2.0
- Connector: SMA male (standard polarity)
- Polarization: Vertical
- Material: Copper alloy spring with protective coating
- Wire Length: ~3 mtrs.
- Applications: GSM, Wi-Fi, Bluetooth, Zigbee, telemetry, and RF remote systems
SKU: n/a -
Sensor Boards And Modules
HC 05 Bluetooth Module
HC‑05 Bluetooth Module – Wireless Serial Communication for Arduino & IoT The HC‑05 Bluetooth module is a reliable wireless transceiver that supports both master and slave modes, making it perfect for Arduino, ESP32, Raspberry Pi, and other microcontroller projects. With easy UART interface and AT command configuration, it enables seamless wireless data transfer, remote control, and IoT connectivity. Ideal for robotics, automation, and DIY electronics.
SKU: n/a -
Sensor Boards And Modules
HCSR501 PIR Motion Sensor
Reliable HC‑SR501 PIR motion sensor module for human motion detection. Features adjustable sensitivity and delay time, wide detection range, and stable digital output. Ideal for security systems, automatic lighting, Arduino/Raspberry Pi projects, and DIY automation.
Technical Specifications:
- Model: HC‑SR501 PIR Sensor
- Operating Voltage: 4.5V – 20V DC
- Detection Range: ~3 – 7 meters (adjustable)
- Detection Angle: ~120°
- Output: Digital high/low signal
- Delay Time: Adjustable (from ~5s to 200s)
- Sensitivity: Adjustable via onboard potentiometer
- Dimensions: ~32 × 24 × 25 mm
- Applications: Motion‑activated lights, alarms, security systems, robotics, DIY electronics
SKU: n/a -
Adaptors and Power Supplies
Hi Link HLK-5M05 5v 5w
The Hi-Link HLK‑5M05 is a compact, isolated AC‑DC power supply module that converts 90–264V AC mains into a stable 5V DC output at up to 1A (5W). It is widely used in smart home devices, IoT systems, automation, and embedded electronics due to its small size, high efficiency, and built‑in protections.
Features and Specifications:
- Ultra‑small size: 38 × 23 × 18 mm, PCB‑mountable
- Safety & Compliance: Meets UL, CE, EMC standards
- Protections: Short‑circuit, overload, and fault self‑recovery
- Durability: 100,000+ hours continuous operation (tested under full load aging)
- Environmental: Encased in waterproof, dustproof plastic (IP65 rated)
- Input Voltage: 90–264V AC (universal range)
- Output Voltage: 5V DC ±0.2%
- Output Current: Rated 1A, peak ≥1.2A
- Power Rating: 5W
- Efficiency: ~70%
- Isolation Voltage: 3000V AC
- Ripple & Noise: ≤50mVp‑p
- No‑load Power Consumption: <0.1W
- Operating Temperature: −20°C to +60°C
SKU: n/a
