Shop
Showing 181–195 of 345 results
-
Cables And Wires
Jumper wire Male to Female Set of 10pcs
These are a set of 10 pcs Jumper wire male to female(having a male pin on one end and a female socket on the other end.)
Connecting and disconnecting the wires from the breadboard is very easy. The wires have strong pin support and are reusable for future projects as well. They come in a variety of colors so tracing the wires or tracing the connections becomes very easy.SKU: n/a -
Cables And Wires
Jumper wire Male to Male Set of 10 pcs
These are a set of 10 pcs Jumper wire male to male(having male pins on both ends)
Connecting and disconnecting the wires from the breadboard is very easy. The wires have strong pin support and are reusable for future projects as well. They come in a variety of colors so tracing the wires or tracing the connections becomes very easy.SKU: n/a -
Drone Spare Parts And Accessories
KK 2.1.5 Multi-rotor LCD Flight Controller Board
The KK 2.1.5 Multi-Rotor LCD Flight Control Board is perfect for building and controlling multirotor aircraft:
Processor: Atmel Mega644PA microcontroller
Sensors: MPU-6050 accelerometer/gyro
Display: Built-in LCD for easy setup
Power: 4.8V to 6.0V input
Features: Barometric sensor, polarity protection, audio warnings
Applications
Quadcopters, hexacopters, and octocoptersEducational projects
DIY multirotor builds
SKU: n/a -
Motors And Motor Drivers
L293d Motor Control Shield For Arduino
L293D Motor Control Shield – Drive Multiple Motors with Ease!
This shield allows you to control up to 4 DC motors, 2 stepper motors, or 2 servo motors using an Arduino board. It features two L293D motor driver ICs and a 74HC595 shift register for extended pin control.
SKU: n/a -
Electronic Components
L293d Motor Driver IC
The L293D is a popular 16-pin Dual H-Bridge motor driver IC used to control the direction and speed of DC motors.
Here are the key features:Bidirectional Control: Can drive two DC motors independently in both directions.
Current Handling: Provides up to 600 mA of continuous current per channel, with a peak current of 1.2A for short durations.
Voltage Range: Operates within a voltage range of 4.5V to 36V.
Enable Pins: Allows turning each motor on or off without altering the control logic.
Thermal Shutdown Protection: Protects against overheating.
Diode Protection: Internal flyback diodes prevent damage from back-EMF generated by the motors.
It’s commonly used in robotics, motor control applications, and DIY projects.
SKU: n/a -
Motors And Motor Drivers
L298N Motor Driver Module
The L298N motor driver module is a high-power driver designed to control DC motors and stepper motors. It features a double H-bridge design, allowing for direction and speed control of two DC motors or one stepper motor. The module supports up to 2A of current and 25W of power.
SKU: n/a -
Sensor Boards And Modules
Laser Diode LM-1 650nm 5mW
The Laser Diode LM-1 is a versatile and compact laser module designed for various applications. Here’s a more detailed description:
Specifications:
Wavelength: 650 nm (red)Power Output: 5 mW
Head Diameter: 6 mm (copper head)
Operating Voltage: 5V DC
Operating Current: Better than 40 mA
Operating Temperature: -10°C to 50°C
Supply Voltage: 5V DC
Power Lead Length: 120 mm
SKU: n/a -
Electronic Components, Others
LCD 16×2 Display Yellow
The 16×2 LCD with a yellow backlight is a great choice for projects needing clear visibility.
Here are its key features:Display Size: 16 columns, 2 rows
Backlight: Yellow, enhancing readability
I2C Interface: Simplifies wiring and reduces pin usage
Power Supply: Operates at 5V
Contrast Adjustment: Typically includes a potentiometer for optimal readability
It’s perfect for Arduino-based projects and other microcontroller applications.
SKU: n/a -
Electronic Components
LCD 16×2 with I2C
The 16×2 LCD with I2C Module simplifies display in projects. Here are its key features:
Display Size: 16 columns, 2 rows
I2C Interface: Reduces wiring, uses only two data pins
Power Supply: 5V operation
Backlight: Enhanced visibility
Compatibility: Works with Arduino, Raspberry Pi, etc.
Ideal for displaying sensor data, creating user interfaces, and educational projects.
SKU: n/a -
-
Led (Light Emitting Diode)
Led 5mm Blue Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Blue
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Green Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Green
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Orange Diffused (Pack of 5pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Orange
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a -
Led (Light Emitting Diode)
Led 5mm Red Diffused (Pack of 5 pcs)
A 5mm diffused LED is a small, round light-emitting diode with a diameter of 5 millimeters. The diffused lens helps to spread the light more evenly, making it less harsh and more suitable for various applications. Here are some key features:
Size: 5mm in diameter
Lens Type: Diffused, which provides a softer light compared to clear LEDs
Colors: Red
Brightness: Typically offers bright illumination, suitable for indicators and decorative lighting
Voltage: Usually operates at a forward voltage of around 1.8V to 3.3V
Applications: Commonly used in DIY electronics projects, indicators, signage, and decorative lighting
SKU: n/a
